|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Global Mixed-mode Technology Inc. G9133 3.3V 1A Low Dropout Regulator with Disable Features Dropout voltage 0.5V @ IO = 1A Output current in excess of 1A Output voltage accuracy 2.5% Quiescent current, typically 5mA Internal short circuit current limit Internal over temperature protection TO220 4pin Full-Mold package ON/OFF control General Description The G9133 positive 3.3V voltage regulator features the ability to source 1A of output current. The dropout voltage is 0.5V at 1A output current. The typical quiescent current is 5mA. Furthermore, the quiescent current is smaller when the regulator is in the dropout mode (VIN < 3.3V). Familiar regulator features such as over temperature and over current protection circuits are provided to prevent it from being damaged by abnormal operating conditions. A VEN pin is provided to disable the output when needed. Ordering Information ORDER NUMBER G9133TF1T G9133TH1T ORDER NUMBER (Pb free) G9133TF1Tf G9133TH1Tf MARKING G9133 G9133 TEMP. RANGE -40C to +85C -40C to +85C PACKAGE TO220F-4 TO220F-4 1 VIN VIN PIN OPTION 2 3 VO VO GND GND 4 VEN VEN Order Number Identification GXXXX XX X X Packing Type Pin Option Package Type Part Number PACKAGE TYPE TF : TO-220F-4 (short lead) TH : TO-220F-4 (long lead) 1 1.: VIN PIN OPTION 2 VO 3 GND 4 VEN PACKING T : Tube Package Type TO-220F-4 Typical Application VEN IO VIN VOUT COUT 47F Top View C1 4.7F 12 3 4 VIN VO GND VEN G9133 IQ Ver: 0.7 Preliminary Jul 12, 2006 TEL: 886-3-5788833 http://www.gmt.com.tw 1 Global Mixed-mode Technology Inc. (Note 1) Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8V VEN Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8V Power Dissipation Internally Limited (Note 2) Maximum Junction Temperature . . . . . . . . . . . . . . . 150C Storage Temperature Range . . . .. -65C TJ +150C Reflow Temperature (soldering, 10sec) . . . . . . .260C Continuous Power Dissipation (TA = +25C) TO220 No heatsink. . . . . . . . . . . . . .. . . . . . . . . . .1.5W TO220 with infinite heatsink . . . . . . . . . . . . . . . . . .15W G9133 Absolute Maximum Ratings Operating Conditions (Note 1) Input Voltage . . . . . . . . . . . . . . . . . . . . . . . .3.6V~7V Temperature Range . . . . . . . . . . . . -40C TA 85C VEN Voltage . . . . . . . . . . . . . . . . . . . . . . . . . .VIN+0.3V Electrical Characteristics VIN =5V, IO = 0.5A, CIN = 4.7F, COUT =47F, TA = TJ = 25C unless otherwise specified [Note 3] PARAMETER Output Voltage Line Regulation Load Regulation Quiescent Current Ripple Rejection Dropout Voltage Short Circuit Current Over Temperature Disable Voltage High Disable Voltage Low Disable Bias Current High Disable Bias Current Low VD SYMBOL VO CONDITION IO =0.5A 4V < VIN < 7V, IO = 10mA 50mA < IO < 1A VIN = 5V, VEN = VIN VIN = 5V, VEN = 0V fi = 120Hz, 1VP-P, IO = 100mA IO = 1A MIN 3.217 ----------------2.0 ------- TYP 3.3 0.5 0.5 5 10 45 0.35 3.8 150 --------- MAX 3.383 2 2 10 30 --0.5 ------0.8 20 20 UNIT V % % mA A dB V A C V V A A IQ VENH VENL IENH IENL Output Active Output Disabled VEN = 2.7V VEN = 0.4V Note 1: Absolute Maximum Ratings are limits beyond which damage to the device may occur. Operating Conditions are conditions under which the device functions but the specifications might not be guaranteed. For guaranteed specifications and test conditions see the Electrical Characteristics. Note2: The maximum power dissipation is a function of the maximum junction temperature, TJmax ; total thermal resistance, JA, and ambient temperature TA. The maximum allowable power dissipation at any ambient temperature is Tjmax-TA / JA. If this dissipation is exceeded, the die temperature will rise above 150C and IC will go into thermal shutdown. For the TO-220 package, JA is 60C/W (No heat sink). Note3: Low duty pulse techniques are used during test to maintain junction temperature as close to ambient as possible. Note4: The type of output capacitor should be tantalum or aluminum. Definitions Dropout Voltage The input/output Voltage differential at which the regulator output no longer maintains regulation against further reductions in input voltage. Measured when the output drops 2% below its nominal value, dropout voltage is affected by junction temperature, load current and minimum input supply requirements. Line Regulation The change in output voltage for a change in input voltage. The measurement is made under conditions of low dissipation or by using pulse techniques such that average chip temperature is not significantly affected. Load Regulation The change in output voltage for a change in load current at constant chip temperature. The measurement is made under conditions of low dissipation or by using pulse techniques such that average chip temperature is not significantly affected. Maximum Power Dissipation The maximum total device dissipation for which the regulator will operate within specifications. Quiescent Bias Current Current which is used to operate the regulator chip and is not delivered to the load. Ver: 0.7 Preliminary Jul 12, 2006 TEL: 886-3-5788833 http://www.gmt.com.tw 2 Global Mixed-mode Technology Inc. Block Diagram G9133 VIN 1 THERMAL SHUTDOWN SHORT-CIRCUIT PROTECTION 2 VO BANDGAP REFERENCE 1.25V _ + R1 HIGH / LOW VEN 4 OUTPUT ON/OFF R2 TTL COMPATIBLE BUFFER 3 GND Ver: 0.7 Preliminary Jul 12, 2006 TEL: 886-3-5788833 http://www.gmt.com.tw 3 Global Mixed-mode Technology Inc. Typical Performance Characteristics (VIN=5V, CIN=10F, COUT =47F, TA=25C, unless otherwise noted.) G9133 Line Transient Response Load Transient Response Short Circuit-Current Output Noise Ripple Rejection 50 45 Ripple Rejection (dB) 40 35 30 25 20 15 10 5 0 10 100 1000 10000 100000 1000000 Disable- ON IL=1A IL=500mA IL=10mA Frequency (Hz) Ver: 0.7 Preliminary Jul 12, 2006 TEL: 886-3-5788833 http://www.gmt.com.tw 4 Global Mixed-mode Technology Inc. Typical Performance Characteristics (continued) Dropout Voltage vs. Temperature 500 IL=1A 0 -0.1 G9133 Load Regulation IL=100mA~1A VIN=5V Dropout Voltage (mV) Load Regulation (%) 400 300 -0.2 -0.3 -0.4 -0.5 -0.6 -0.7 -0.8 -0.9 200 100 VIN=4V 0 -40 -20 0 20 40 60 Temperature (C) 80 100 -1 -30 -10 10 30 50 70 90 Temperature (C) Output Voltage vs. Temperature 3.5 3.45 3.4 VOUT (V) 3.35 VIN=5V 3.3 3.25 3.2 3.15 3.1 -40 -20 0 20 40 60 80 100 Temperature (C) 0 VIN=4V IL=0.5A Quiescent current (mA) Quiescent Current vs. Temperature 5 4 VIN=6V 3 2 1 VIN=4V VIN=5V -30 -10 10 30 50 70 90 Temperature (C) Output Voltage vs. Disable Voltage 5 5.0 4.5 Output Voltage Vo(V) Output Voltage Vo(V) 4 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 0 0.5 1 1.5 2 2.5 Disable Voltage Vdis(V) 3 0.0 0 Output Voltage vs. Input Voltage 3 2 IL=0A 1 IL=1A 1 2 3 4 5 Input Voltage VIN (V) 6 7 Ver: 0.7 Preliminary Jul 12, 2006 TEL: 886-3-5788833 http://www.gmt.com.tw 5 Global Mixed-mode Technology Inc. Typical Performance Characteristics (continued) G9133 Quiescent Current vs. Input Voltage 4.0 3.5 Quiescent Current IQ(mA) 3.0 2.5 2.0 1.5 1.0 0.5 0.0 0 1 2 3 4 5 6 7 Input Voltage Vin(V) Power dissipation Pd (W) Power Dissipation vs. Temperature (TA) 3.5 3 2.5 2 1.5 1 0.5 0 -25 -5 15 35 55 Temperature (TA) 75 without heatsink heatsink (5in2) Heatsink Package Dimension TO-220F-4 Ver: 0.7 Preliminary Jul 12, 2006 TEL: 886-3-5788833 http://www.gmt.com.tw 6 Global Mixed-mode Technology Inc. Package Information G9133 E1 L b D e L2 L1 E A A1 He TO-220F-4 Package (short lead) DIMENSION IN MM NOM. 4.57 2.79 1.78 10.10 6.95 8.64 7.35 16.66 3.70 22.94 0.48 2.54(TYP) 0.635(TYP) 7 SYMBOL A A1 A2 D E E1 L L1 L2 He C e b MIN. 4.42 2.69 1.68 10.00 6.85 8.54 7.15 16.56 3.60 22.54 ------------4 MAX. 4.72 2.89 1.88 10.20 7.05 8.74 7.55 16.76 3.80 23.34 ------------11 Ver: 0.7 Preliminary Jul 12, 2006 7 C A2 MIN. 0.174 0.106 0.066 0.394 0.269 0.336 0.281 0.652 0.142 0.887 ------------4 DIMENSION IN INCH NOM. 0.180 0.110 0.070 0.398 0.273 0.340 0.289 0.656 0.146 0.903 0.019 0.1(TYP) 0.025(TYP) 7 MAX. 0.186 0.114 0.074 0.402 0.278 0.344 0.297 0.660 0.150 0.919 ------------11 TEL: 886-3-5788833 http://www.gmt.com.tw Global Mixed-mode Technology Inc. G9133 L b E1 D e L2 L1 E A A1 He TO-220F-4 Package (long lead) SYMBOL A A1 A2 D E E1 L L1 L2 He C e b MIN. 4.42 2.69 1.68 10.00 6.85 8.54 13.15 16.56 3.60 28.44 ------------4 DIMENSION IN MM NOM. 4.57 2.79 1.78 10.10 6.95 8.64 13.35 16.66 3.70 28.94 0.48 2.54(TYP) 0.635(TYP) 7 MAX. 4.72 2.89 1.88 10.20 7.05 8.74 13.55 16.76 3.80 29.44 ------------11 Taping Specification PACKAGE TO-220F-4 Q'TY/BY TUBE 50 ea GMT Inc. does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and GMT Inc. reserves the right at any time without notice to change said circuitry and specifications. Ver: 0.7 Preliminary Jul 12, 2006 8 C A2 MIN. 0.174 0.106 0.066 0.394 0.269 0.336 0.518 0.652 0.142 1.119 ------------4 DIMENSION IN INCH NOM. 0.180 0.110 0.070 0.398 0.273 0.340 0.526 0.656 0.146 1.139 0.019 0.1(TYP) 0.025(TYP) 7 MAX. 0.186 0.114 0.074 0.402 0.278 0.344 0.533 0.660 0.150 1.159 ------------11 TEL: 886-3-5788833 http://www.gmt.com.tw |
Price & Availability of G9133 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |